UJANJA KUPATA NATS PIN (Nissan Anti-Theft System)

Hii software inaweza kusaidia wakati ku program transponder keys to a wide range of Nissan na Infiniti vehicles. 

So kamwe kutemea dealer au mtalaamu juu na wewe unaweza kuweka hii code kwa kutumia aina ya mashine yeyeote!    Yaani, unahitahi>> Date code, the Encrypted Pin na Origin of the Immobilizer system. Hizi details can be found either on the sticker of the IMMU unit around the ignition lock, or on the sticker of the SEC unit located between the steering wheel and the center console.  Jinsi hii video inaonesha

nat-1.png
Type 1 Sticker: IMU Aerial
Location: around the Ignition
Red: Date Code. (Use only the last 6 digits)
Yellow: Encrypted PIN.
Green: Origin.
52335A + 0688 + Mexico = 2095
nat-2.png
Type 1 Sticker: IMU Aerial
Location: around the Ignition
Red: Date Code. (Use only the last 6 digits)
Yellow: Encrypted PIN.
Green: Origin.
42643A + 533E + Germany = 0154
nats-5.PNG

UJANJA WA VPN KWENYE OPERA BROWSER

VPN ni Virtual Private Network ambao inakupa utambulisho wa kuoneka kwenye mtandao kama uko nchi ingine tofauti na nchi ulipo! Kwa mfano, ukiwa BURUNDI huu ujanja wa VPN unaweza kufanya uonekane kama uko KENYA! Kwenye hii video tumejaribu kuonehsa jinsi ya kuweka VPN kwenye browser ya Opera!   go MENU then SETTINGS  go PRIVACY & SECURITY then TICK enable VPN …alafu enjoy!!

KUTAMBUA & KUTENGENEZA TATIZO KWENYE GARI YAKO MWENYEWE

Hii software imekusanya ma tatizo mengi au yote inaweza kutokea kwenye gari lako. So unaweka tu sign au symptom kwenye gari alafu inakuambia nini shida, jinsi ya kutatua na kuizuia isitokee tena! iko na video na picha! inafanya vizuri kwenye system za WINDOWS 7 kwenda chini!


Alafu hii video inaonesha matumizi na jinsi ya ku download

ANDROID somo-0 (ufananuzi)

-Katika hili somo, pata kufahamu au umbea sahihi kuhusu system ya android kabla kwendelea kutengenza application za android.
-Hii tovuti www.android.com inaelezea zaidi kama kwenye hii video

Kwenye hizi vitabu tumejaribu ku summurise kuhusu android kufungua kusoma page ingine bonyeza tu kwenye kitabu


NA HIKI NI KITABU PIA   kumbuka kutembelea www.android.com

UJANJA fulani kwenye windows

#1 How To Access Your Folder As a Drive

Go to start> run> cmd
In command prompt,
Type:  subst Z: D:\folder
then hit Enter…
You can replace Z: with your desired New Drive Letter (Except existing Drive letters)
You can replace D:\folder with the path of your favorite folder
Now, Type: exit
This will creates a new drive & When you open this , it will open your folder.
NOTE: On Restart the Virtual Drive Disappears .

#2 How To Create Folder And Files With No Name

no name

1) Select any file or folder.
2) Right click on it, select ‘Rename’ or simply press ‘F2’.
3) Press and hold the ‘Alt’ key. While holding the Alt key, type numbers ‘0160’ from the numpad.
NOTE- Type the numbers ‘0160’ from the numpad, that is, the numbers present on the right side of the keyboard.
Don’t type the numbers which are present on top of the character keys.
4) Press Enter and the nameless file or folder will be created.
REASON- The file or folder that seems nameless is actually named with a single space.
NOTE : If you want to create another nameless file or folder in the same directory ?For this you will have to rename the file with 2 spaces. Repeat step 3 to create as many nameless files or folders in the same directory.You can also try 255 in place of 0160.

#3 How to Block Websites Without Any Software

Go to C:\Windows\System32\Drivers\Etc
Find the File named “HOSTS”

hosts

host 1
Under “127.0.0.1 localhost” just add the site you want to block
For Example
127.0.0.2 www.facebook.com
Save the file & exit notepad. (Restart your computer for changes.)
Now both website are blocked at all.
Just add anyother website you want to block but remember last number must increase in every website.
e.g.
127.0.0.1 localhost
127.0.0.2 www.twitter.com
127.0.0.3 www.facebook.com

#4 How To Create Own Run Commands In Windows

Step 1: Create the shortcut for the folder or tool for which you need to create the shortcut.
Right-click on your Desktop and select New -> Shortcut.
You will see a “Create Shortcut” Dialog box
Type notepad.exe then press next.
Then type any name for the shortcut.
shortcit
Step 2: Open the run command and goto \Windows
run wind
Step 3: Paste the shortcut to that folder and change the name of the shortcut to run command as we want.
For Example i suppose my shortcut name is “MJANJA” and when i open run command and type mjanja my E: Drive Open Automatically.
Now we can open the folder or tool from run command using the name we have given for the shortcut.

#5 How To Disable Right Click On Desktop

Go to Start > Run > type ” regedit “.
Once in regedit go to
     [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ Explorer] which disables right click for only the current user or
   [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\ Explorer] which disables the right click for all users.
Now either modify or create a new DWORD value named NoViewContextMenu and set the value data to 1.
Now, exit the registry, and restart your computer for the change to take effect.
 SECOND METHOD:
 Steps to resolve:
 1. Go to Start >Run >Type “gpedit.msc” click OK.
 2. Get to this location: User Configuration –> Administrative templates –> Windows Components –> Windows Explorer
 3. In the right pane double click on : Remove Windows Explorer’s default context menu.

 4. Select Disable and click OK.

#6 Some Important DOS Commands Which Makes You a Better Programmer

LIST OF SOME DOS COMMANDS
First of all open command Prompt
Go to start> run> cmd
1. To create a new directory.
Command:
C:\>mkdir hack
Or
C:\>md hack
[hack is your directory name]
2. To remove a directory.
Command:
C:\>rmdir hack
Or
C:\>rd hack
[hack is your directory name].
3. To clear the screen.
Command:
C:\>cls
4. To see the contents or subdirectory of directory.
Command:
C:\>dir
Or
C:\>dir /p
[“dir /p” to see page by page].
Or
C:\>dir /a
[“dir /a” to see all directories+hidden directories].
Or
C:\>dir /ah
[“dir /ah” to see only hidden directories].
5. To change the directory.
Command:
C:\>cd hack
[hack is your directory name].
C:\>cd..
[cd followed by 2 periods takes you one level up i.e to the parent directory]
C:\>cd\
[cd followed by backslash periods takes you to the top directory i.e directly under the drive]
6. To rename a directory or file.
Command:
C:\>ren hack hacknew
[By this command the folder hack is rename to hacknew].
7. To move a file from one destination to another.
C:\>move sourcepath destinationpath
Command:
C:\>move C:\hack.txt D:\
[hack.txt is your directory name].
8. To create a new file.
Command:
C:\>copy con hack.txt
[Once you create the file press enter and type the information inside the file.
To save the file hold CTRL and press Z . This will return ^Z. Once this has been entered press enter to save and exit the file.].
[hack.txt is your file name].
9. To see the content of a text file.
Command:
C:\>type hack.txt
[hack.txt is your file name].
10. To delete a file.
Command:
C:\>del hack.txt
[hack.txt is your file name].
11. To edit a file.
Command:
C:\>edit hack.txt
[hack.txt is your file name].
12. To copy a file from one destination to another.
C:\>copy sourcepath destinationpath
Command:
C:\>copy C:\hack.txt D:\
[hack.txt is your file name].
13. To copy a directory from one destination to another.
C:\>xcopy sourcepath destinationpath /s
Command:
C:\>xcopy C:\hack D:\ /s
[hack is your directory name]
14. Exit from command prompt.
Command:
C:\>exit

#7 How To Enable Registry Editor Which Is Disabled By Administrator

Here is a simple trick for you that will enable the registry editor which is disabled by administrator.
Just follow the steps as given below :
1.Open Notepad and copy below codes.
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  “DisableRegistryTools”=dword:00000000
2. Now save the file as anything.reg
3. Double click the save file.
4. Done.

 

#8 How To Enable God Mode In Windows 7,8,8.1 or 10

To Enable ‘God Mode’ in Windows 7
This trick is running on OS Windows 7,8,8.1 or 10.
To enter the “GodMode” we need to create a new folder.

Then rename the folder to:

GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}
The folder icon will change to Control Panel icon and will contain hundreds of Control options Access

#9 How To Hide A Folder Using Command Prompt

If you want to hide a folder named ABC in your C drive.
Just follow the steps as given below :-
STEP 1: Goto Run and type cmd.
STEP 2: Type this code   attrib +s +h C:\ABC  and press ENTER
Try It To Your Own PC
Where:
C:\ :Drive name
ABC: Folder name
+h = to hide the folder
+s = to list it as system file – so the hidden will be protected by system
STEP 3: If you want to make that folder appear then…
STEP 4: Type this code  attrib -s -h C:\ABC
Enjoy.

#10 How To Hide A Folder Without Any Software

This trick is very interesting..
& its really easy.This trick will allow you to hide folder without any software.
1) Select any file or folder.
2) Right click on it, select ‘Rename’ or simply press ‘F2’.
3) Press and hold the ‘Alt’ key. While holding the Alt key, type numbers ‘0160’ from the numpad.
4) Press Enter and the nameless file or folder will be created.
5) Right click it and select “Properties” select the tab “customize” and select “change icon” scroll along and you should a few blanc spaces click on any one and click ok and save it.
You can easily see this folder which become a hidden folder.you have to make this folder on your deskotp, So no one can see your folder easily and no one access your data easily.
6)Now save your important files in this hidden folder.

#11 How To Hide Hard Drive Partition

This A Very Useful trick who want to hide their data.
Just follow the steps as given below :
1) Go to Start > Run > type “diskpart”.
A DOS window will appear with following description.
DISKPART>
2) Then type “list volume”
The result will look something like one as shown below-
3) Suppose you want to hide drive E then type  “select volume 4”
Then a message will appear in same window { Volume 4 is the selected volume}
4) Now type “remove letter E”

Now a message will come { Diskpart Removed the Drive letter }

If You want your partiton back then you have to do this process.
You have to do the same process which you done to hide drive but in the 4th step you have to write “ASSIGN LETTER E”.this command will unhide your drive.
Now Enjoy this cool trick.

#12 How To Hide Data In Notepad

Here is a very interesting trick to hide text inside your windows default text editor”Notepad” using command prompt, but this trick works only on NTFS file system.
Steps:
1. Go to your command prompt Start–>Run and Type cmd
2. Type cd to move to C:\> drive or Type cd desktop to move to your desktop.
3. Type the below code in your command prompt
notepad file.txt: hidden
4. Write some data and save (Ctrl+s) the file.
5. Browse to the file location and Open file.txt you cannot see any data in the file.
6. To retrieve the hidden data open command prompt and type the same command.
Notepad file.txt:hidden

#13 How To Hide User Account In Windows Login

Go to Start > Run > type ” regedit “.
Step 1:Once in regedit go to HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Winlogon
In the left panel, right click on Winlogon and click New and click Key.
Type SpecialAccounts and press Enter.
In the left panel, right click on SpecialAccounts and click New and click Key.
Type UserList and press Enter.
In right panel of UserList, right click on a empty area and click New then click DWORD (32bit) Value.
Type in the name of the user account that you want to hide and press Enter.eg:  Account.
In the right panel, right click on the user account name and click Modify.
To hide the user account – Type 0 and click OK. (number zero not the letter)
Whenever you want to use the account just unhide the it by typing 1 instead of zero.

#14 How To Change Drive Letter

To change drive letters.
Just follow the steps as given below :
1.Go to Start >Control Panel >Administrative Tools >Computer Management >Disk Management >
Second Method:
You can go directly by typing the command in run: diskmgmt.msc
Then right-click the partition whose name you want to change (click in the white area just below the word “Volume”) and select “change drive letter and paths.” From here you can add, remove or change drive letters and paths to the partition.

#15 How To Change Folder Background

1.Open Command Prompt and set folder attribute to “system”. Suppose there is a folder “DHRUVAL” in “E:\” drive, in which you want to set a wallpaper as background image.
TYPE.:  attrib +s E:\DHRUVAL
2. Now open Notepad and paste following code:
[ExtShellFolderViews]
{BE098140-A513-11D0-A3A4-00C04FD706EC} = {BE098140-A513-11D0-A3A4-00C04FD706EC}
[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
Attributes=1
IconArea_Image=D:\Wallpaper\Image1.jpg
IconArea_Text=0x00000000
Now change “path_of_the_wallpaper” to the exact path of the wallpaper which you want to set as background. Suppose the wallpaper is stored in “D:\Wallpaper\Image1.jpg”.
3. Now save the file with name “Desktop.ini” (including quotes) and copy the file in the desired folder which is “DHRUVAL” in our example.
4. Thats it. Close the folder and re-open it. Now it should show the wallpaper as background.
IconArea_Text
Black – 0x00000000
White – 0x00FFFFFF
Green – 0x0000FF00
Blue – 0x00FF0000
Purple – 0x00C000C0
Red – 0x000000FF
Yellow – 0x0000FFFF
Indigo – 0x00FFFF00
NOTE: This trick works only in windows xp.

#16 How To Hide Text  Behind The Images

First copy any Image to your C: directory
Open cmd by going Start-Run program- type cmd (Administrative mode)
Type command cd\ in cmd press enter.
Now write command as:
echo “your text to hide” >> image.jpg
change ‘you text to hide’ to your message and also name of the image.
Now go to your image and open it with Notepad and you will your hidden message at the end of the image file contents.
Here you see my hidden text is shown in the notepad at last of the image text.This is a awesome trick to send your secret messages to your friends.

#17 How To Make An UnDeleteable Folder

1. Open cmd ( Type in Run option, the command ‘cmd’ or navigate to All Programs->Accessories-> Command Prompt)
2. In cmd,change the directory that you want. for example to change from your current drive to D drive (Type D:)
3. Type md \lpt1\\ and press enter, the folder now will be in your D:
 4. If you try to delete or rename it, it will appear error message
See You can’t del this folder right with this method.you have to try our mehtod.
5. If you want to delete it just go to ‘cmd’, navigate to the directory and type rd \lpt1\\ and press Enter.

#18 Some Cool Keyboard Tricks

[Windows] + [D]
Show or Hide the desktop
[Windows] + [Home]
Minimize all but selected window. Reverse by clicking the key combination again.
[Windows] + [Spacebar]
Make all open windows transparent to view gadgets and icons on desktop.
[Windows] + left arrow OR [Windows] + right arrow
Dock selected window to the left or right half of your screen.
[Windows] + up arrow OR [Windows] + down arrow
Maximized and restores the selected window.
[Windows] + [Tab]
Launch 3D representation of open windows and click [Tab] key again to flip through them.
[Windows] + [B]
Puts focus on the ‘show hidden icons’ button on the system tray.
[Windows] + [1] To [Windows] + [9]
Launch first through ninth icon on taskbar, including items pinned to taskbar.
[Windows] + [SHIFT] + [1] To [Windows] + [SHIFT] + [9]
Starts new instance of respective taskbar icon.
[Windows] + [Alt] + [1] To [Windows] + [Alt] + [9]
Opens jump list for respective icon.
[Windows] + [T] OR [Windows] + [SHIFT] + [T]
Move focus to front or back of taskbar.
[Alt] + [Ctrl] + [Tab] + left/right/up/down arrow
Flip window.
[Alt] + [Tab]
Cycle through open windows.
[Windows] + [P]
Select the Projector Mode
[Windows] + [+] OR [Windows] + [-]
Activates Windows Magnifier to zoom in or out of screen.
[Ctrl] + [Alt] + [D]
Switch to docked mode.
Ctrl] + [Alt] + [L]
Switch to lense mode.
[Ctrl] + [Alt] + [F]
Switch from docked or lens mode back to full screen mode.
[Ctrl] + [Alt] + [I]
Invert colors.
[Windows] + [Esc]
Exist magnifier views.
[Windows] + [G]
Cycle through desktop gadgets.
[Windows] + [X]
Launches Windows Mobility Center. Especially useful if you’re working on a laptop

#19 How To Lock A Folder Without Any Software

1. Open notepad and paste the following code in it.
 2. Change the password in place of (qwerty)
3. Save the notepad as: Locker.bat
4. At first time start it will create folder with Locker automatically for u.
5. After creation of Locker folder again click on the Locker.bat
6. It will ask.press Y then Locker folder will be disappeared.
7. Again to get it click on locker.bat and give your password you will get the folder again.
note: current password is qwerty
CODE:
cls
@color A
@echo off
if EXIST “Dhruval Patel” goto UNLOCK
if NOT EXIST Locker  goto mdfolder
:confirm
echo Are you sure want to lock the locker(Y/N)
set/p “ch=”
if %ch%==y goto lock
if %ch%==Y goto lock
if %ch%==n goto end
if %ch%==N goto end
echo invalid choice
goto confirm
:lock
ren locker “Dhruval Patel”
attrib +s +h “Dhruval Patel”
echo lock successfully
goto end
:unlock
echo Enter password for unlock
set/p “pass=”
if NOT %pass%==qwerty goto fail
attrib -s -h “Dhruval Patel”
ren “Dhruval Patel” locker
echo Unlock successfully
goto end
:fail
echo Invalid Password
goto end
:mdfolder
md locker
echo Locker created successfully
goto end
:end
echo Locker generated by Dhruval Patel
echo www.HowToDoAnything.org
pause:
When You Run The Batch File There a folder “Locker” Automatically Genrated.Put your stuff in this folder.
After this process run the locker.bat again.this time it wiil ask you that you want  to lock the folder.Press “Y” and then hit enter to lock the folder
You Will see your locker folder disappear automatically.
you have to run the script again to get access of your folder.
You have to enter your password to access the folder.